Documentation

Setting up proxy tunneling

We will set up a proxy server on a GCP VM instance running Shadowsocks and use it to tunnel the Sandbox network traffic. This will allow you to use a dedicated IP address for outgoing requests.

GCP VM setup

Create a firewall rule to allow all tcp/udp traffic to port 8388.

Replace your-project-id with your actual project ID.

gcloud compute firewall-rules create shadowsocks \
    --project=your-project-id \
    --direction=INGRESS \
    --priority=1000 \
    --network=default \
    --action=ALLOW \
    --rules=tcp:8388,udp:8388 \
    --source-ranges=0.0.0.0/0 \
    --target-tags=allow-shadowsocks

Create a VM instance with the following tags: allow-shadowsocks.

Replace your-project-id with your actual project ID.

gcloud compute instances create shadowsocks-vm \
    --project=your-project-id \
    --zone=us-west1-a \
    --machine-type=n2-standard-2 \
    --can-ip-forward \
    --tags=allow-shadowsocks \
    --image-project=debian-cloud \
    --image-family=debian-12 \
    --boot-disk-size=20GB

After the VM is created, you can connect to it using the following command:

Replace your-project-id with your actual project ID.

# May take a few seconds until the instance is ready to accept SSH connections
gcloud compute ssh shadowsocks-vm \
    --project=your-project-id \
    --zone=us-west1-a

Shadowsocks server setup (VM)

SSH into the VM and follow the instructions below to install and configure Shadowsocks.

Install the necessary packages, if missing:

sudo apt update
sudo apt install -y wget tar

Download and install Shadowsocks (v1.24.0):

wget https://github.com/shadowsocks/shadowsocks-rust/releases/latest/download/shadowsocks-v1.24.0.x86_64-unknown-linux-gnu.tar.xz
tar -xf shadowsocks-*.tar.xz
sudo mv ssserver ssmanager ssurl /usr/local/bin/

Create a shadowsocks configuration file:

Replace STRONG_PASSWORD_HERE with your own password.

/etc/shadowsocks/server.json

{
    "server": "0.0.0.0",
    "server_port": 8388,
    "password": "STRONG_PASSWORD_HERE",
    "method": "aes-256-gcm",
    "mode": "tcp_and_udp",
    "timeout": 300,
    "fast_open": true
}

Enable IP forwarding:

/etc/sysctl.d/99-shadowsocks.conf

net.core.default_qdisc=fq
net.ipv4.tcp_congestion_control=bbr
net.ipv4.ip_forward=1

sudo sysctl -p /etc/sysctl.d/99-shadowsocks.conf

Optional: Update the Ubuntu Firewall rules to allow traffic to port 8388:

sudo ufw allow 8388/tcp
sudo ufw allow 8388/udp

Start the Shadowsocks server:

sudo ssserver -c /etc/shadowsocks/server.json -v

You should see the following in the console output:

shadowsocks tcp server listening on 0.0.0.0:8388
shadowsocks udp server listening on 0.0.0.0:8388

Optional: Create a systemd service to start the Shadowsocks server on boot:

/etc/systemd/system/ssserver.service

[Unit]
Description=Shadowsocks Rust Server
After=network.target

[Service]
ExecStart=/usr/local/bin/ssserver -c /etc/shadowsocks/server.json
Restart=always
LimitNOFILE=51200
User=root

[Install]
WantedBy=multi-user.target

Reload the systemd daemon and start the service:

sudo systemctl daemon-reload
sudo systemctl enable --now ssserver

You can check the status of the service with the following command:

sudo systemctl status ssserver

Shadowsocks client setup (sandbox)

Create a custom Sandbox template that uses the shadowsocks client to tunnel TCP traffic through the proxy server we set up above.

Local proxy
Transparent proxy

Route only designated traffic through the proxy.

Create a configuration file for the shadowsocks client:

Replace SERVER_IP with the IP address of the proxy server and STRONG_PASSWORD_HERE with your own password.

config.json

{
    "server": "SERVER_IP",
    "server_port": 8388,
    "password": "STRONG_PASSWORD_HERE",
    "method": "aes-256-gcm",
    "local_address": "0.0.0.0",
    "local_port": 1080,
    "mode": "tcp"
}

Create a template file (template.ts / template.py):

import { Template, waitForPort } from "e2b";

const shadowSocksVersion = "1.24.0"
const downloadUrl = `https://github.com/shadowsocks/shadowsocks-rust/releases/latest/download/shadowsocks-v${shadowSocksVersion}.x86_64-unknown-linux-gnu.tar.xz`

export const template = Template()
    .fromBaseImage()
    .runCmd([
        `wget ${downloadUrl}`,
        "tar -xf shadowsocks-*.tar.xz",
        "sudo mv sslocal /usr/local/bin/"
    ])
    .copy('config.json', 'config.json')
    .setStartCmd(
        "sudo sslocal -c config.json --daemonize",
        waitForPort(1080)
    )

from e2b import Template, wait_for_port

shadowsocks_version = "1.24.0"
download_url = f"https://github.com/shadowsocks/shadowsocks-rust/releases/latest/download/shadowsocks-v{shadowsocks_version}.x86_64-unknown-linux-gnu.tar.xz"

template = (
    Template()
    .from_base_image()
    .run_cmd([
        f"wget {download_url}",
        "tar -xf shadowsocks-*.tar.xz",
        "sudo mv sslocal /usr/local/bin/"
    ])
    .copy("config.json", "config.json")
    .set_start_cmd(
        "sudo sslocal -c config.json --daemonize",
        wait_for_port(1080)
    )
)

Create a build script (build.ts / build.py):

import { Template, defaultBuildLogger } from "e2b";
import { template as localProxyTemplate } from "./template";

await Template.build(template, {
    alias: 'shadowsocks-client',
    memoryMB: 1024,
    cpuCount: 1,
    onBuildLogs: defaultBuildLogger()
})

from e2b import Template, default_build_logger
from .template import template

Template.build(
    template,
    alias="shadowsocks-client",
    memory_mb=1024,
    cpu_count=1,
    on_build_logs=default_build_logger()
)

Build the template using the build script:
npx tsx build.ts
python build.py

Route all traffic through the proxy.

Create a configuration file for the shadowsocks client:

Replace SERVER_IP with the IP address of the proxy server and STRONG_PASSWORD_HERE with your own password.

config.json

{
    "server": "SERVER_IP",
    "server_port": 8388,
    "password": "STRONG_PASSWORD_HERE",
    "method": "aes-256-gcm",
    "local_address": "0.0.0.0",
    "local_port": 1080,
    "mode": "tcp"
}

Create a script for setting up the iptables rules:

Replace SERVER_IP with the IP address of the proxy server.

iptables-rules.sh

iptables -t nat -N SHADOWSOCKS
iptables -t nat -A SHADOWSOCKS -d SERVER_IP -j RETURN
iptables -t nat -A SHADOWSOCKS -d 0.0.0.0/8 -j RETURN
iptables -t nat -A SHADOWSOCKS -d 127.0.0.0/8 -j RETURN
iptables -t nat -A SHADOWSOCKS -d 169.254.0.0/16 -j RETURN
iptables -t nat -A SHADOWSOCKS -p tcp -j REDIRECT --to-ports 12345
iptables -t nat -A OUTPUT -p tcp -j SHADOWSOCKS

Create a template file (template.ts / template.py):

import { Template, waitForPort } from "e2b";

const shadowsocksVersion = "1.24.0"
const downloadUrl = `https://github.com/shadowsocks/shadowsocks-rust/releases/latest/download/shadowsocks-v${shadowsocksVersion}.x86_64-unknown-linux-gnu.tar.xz`

export const template = Template()
    .fromBaseImage()
    .aptInstall("iptables")
    .runCmd([
        `wget ${downloadUrl}`,
        "tar -xf shadowsocks-*.tar.xz",
        "sudo mv sslocal /usr/local/bin/"
    ])
    .copy('config.json', 'config.json')
    .copy('iptables-rules.sh', 'iptables-rules.sh', { mode: 0o755 })
    .setStartCmd(
        "sudo sslocal -c config.json --protocol redir -b 0.0.0.0:12345 --daemonize && sudo iptables-rules.sh",
        waitForPort(1080)
    )

from e2b import Template, wait_for_port

shadowsocks_version = "1.24.0"
download_url = f"https://github.com/shadowsocks/shadowsocks-rust/releases/latest/download/shadowsocks-v{shadowsocks_version}.x86_64-unknown-linux-gnu.tar.xz"

template = (
    Template()
    .from_base_image()
    .apt_install("iptables")
    .run_cmd([
        f"wget {download_url}",
        "tar -xf shadowsocks-*.tar.xz",
        "sudo mv sslocal /usr/local/bin/"
    ])
    .copy("config.json", "config.json")
    .copy("iptables-rules.sh", "iptables-rules.sh", mode=0o755)
    .set_start_cmd(
        "sudo sslocal -c config.json --protocol redir -b 0.0.0.0:12345 --daemonize && sudo iptables-rules.sh",
        wait_for_port(1080)
    )
)

Create a build script (build.ts / build.py):

import { Template, defaultBuildLogger } from "e2b";
import { template as localProxyTemplate } from "./template";

await Template.build(template, {
    alias: 'shadowsocks-client',
    memoryMB: 1024,
    cpuCount: 1,
    onBuildLogs: defaultBuildLogger()
})

from e2b import Template, default_build_logger
from .template import template

Template.build(
    template,
    alias="shadowsocks-client",
    memory_mb=1024,
    cpu_count=1,
    on_build_logs=default_build_logger()
)

Build the template using the build script:
npx tsx build.ts
python build.py

Using the proxies

Create a new Sandbox from the built template and run a curl command to verify that the traffic is routed through the proxy:

Local proxy
Transparent proxy

Only designated traffic should be routed through the proxy.

import { Sandbox } from "e2b";

// create a new Sandbox from the built template
const sbx = await Sandbox.create('shadowsocks-client')

// run a command to curl the IP address of the proxy server
const curl = await sbx.commands.run('curl --socks5 127.0.0.1:1080 https://ifconfig.me')
console.log(curl.stdout)

await sbx.kill()

from e2b import Sandbox

# create a new Sandbox from the built template
sbx = Sandbox.create('shadowsocks-client')

# run a command to curl the IP address of the proxy server
curl = sbx.commands.run('curl --socks5 127.0.0.1:1080 https://ifconfig.me')
print(curl.stdout)

sbx.kill()

npx tsx sandbox.ts

python sandbox.py

You should see the IP address of the proxy server.

All traffic should be routed through the proxy.

import { Sandbox } from "e2b";

// create a new Sandbox from the built template
const sbx = await Sandbox.create('shadowsocks-client')

// run a command to curl the IP address of the proxy server
const curl = await sbx.commands.run('curl https://ifconfig.me')
console.log(curl.stdout)

await sbx.kill()

from e2b import Sandbox

# create a new Sandbox from the built template
sbx = Sandbox.create('shadowsocks-client')

# run a command to curl the IP address of the proxy server
curl = sbx.commands.run('curl https://ifconfig.me')
print(curl.stdout)

sbx.kill()

npx tsx sandbox.ts

python sandbox.py

You should see the IP address of the proxy server.

​Setting up proxy tunneling

​GCP VM setup

​Shadowsocks server setup (VM)

​Shadowsocks client setup (sandbox)

​Using the proxies

Setting up proxy tunneling

GCP VM setup

Shadowsocks server setup (VM)

Shadowsocks client setup (sandbox)

Using the proxies